kaarelcool
Registered
Hi to everyone!
I have a problem,that my home-country local MAC forum cannot resolve.
The thing is,that I did a bit of overclocking on my G3 DUAL USB 500MHZ IBOOK.I overclocked FSB bus to 100MHZ and CPU speed to 600MHZ.But after
that,my IBOOK wouldn't recognize internal HDD.Laptop itself works just fine,
it boots from OSX Panther CD and so on,but OSX install JUST WON'T SHOW ME ANY HARD DRIVE WHERE TO INSTALL ITSELF ON TO.As you know... CD and HDD are connected via the same cable to the motherboard and CD works fine.I thought that maybe the part of the cable which was connected to the hdd was broken,so I changed the hole cable.Nothing happened,everything
was still the same.I have tested HDD in other computer and it works fine.Also I have tried 2 different HDD-s in Ibook- still the same.I have also tried to reset everything I can> power managment reset (through that button) and reset via functsion+option+p+r (on keyboard...or smth. like that) My smartness has run out.What shall I do?? Any suggestions...
I should mention that if I don't but any OS cd into the CD-DRIVE,then I get
flashing folder with question-mark on my screen.
Anyway,I think that the problem might be related to hdd partitions.I deleted my original OSX partition right after I got overclocked laptop back (because OSX install didn't recognized it) and then changed HDD-s partition to FAT32.(I thought that maybe OSX partition had been damaged during the overclocking process) But maybe the problem was still the cable (right in the beginning) and now OSX install wouldn't recognize my hdd, because it's in FAT32 format? Other thing what makes me think about that: as I told,if there is no CD in CD-DRIVE IBook shows blinking question mark with a folder on its
screen.But yesterday I managed to delete hdd's FAT32 partition and replace it with HSF+. (in other laptop and in Windows XP) And when I but that hdd with HSF+ back to my IBOOK one change occured.Now, if it is turned on without OSX CD in it's CD-DRIVE, it shows on screen at first big globe and after a while blinking question mark with a folder.Therefore I assume,that
the problem cannot be in hardware,because if I changed HDD partion type,
then something else also changed?? Anyway OSX install still didn't show any HDD. What I have to do?? Could FSB upgrade be the key to that problem? (I don't want to believe it,because I read,that if overclocked,IBOOK would work fine, or it would crash- nothing related to the hdd.) HELP!!!
Kaarel from Estonia.
I have a problem,that my home-country local MAC forum cannot resolve.
The thing is,that I did a bit of overclocking on my G3 DUAL USB 500MHZ IBOOK.I overclocked FSB bus to 100MHZ and CPU speed to 600MHZ.But after
that,my IBOOK wouldn't recognize internal HDD.Laptop itself works just fine,
it boots from OSX Panther CD and so on,but OSX install JUST WON'T SHOW ME ANY HARD DRIVE WHERE TO INSTALL ITSELF ON TO.As you know... CD and HDD are connected via the same cable to the motherboard and CD works fine.I thought that maybe the part of the cable which was connected to the hdd was broken,so I changed the hole cable.Nothing happened,everything
was still the same.I have tested HDD in other computer and it works fine.Also I have tried 2 different HDD-s in Ibook- still the same.I have also tried to reset everything I can> power managment reset (through that button) and reset via functsion+option+p+r (on keyboard...or smth. like that) My smartness has run out.What shall I do?? Any suggestions...
I should mention that if I don't but any OS cd into the CD-DRIVE,then I get
flashing folder with question-mark on my screen.
Anyway,I think that the problem might be related to hdd partitions.I deleted my original OSX partition right after I got overclocked laptop back (because OSX install didn't recognized it) and then changed HDD-s partition to FAT32.(I thought that maybe OSX partition had been damaged during the overclocking process) But maybe the problem was still the cable (right in the beginning) and now OSX install wouldn't recognize my hdd, because it's in FAT32 format? Other thing what makes me think about that: as I told,if there is no CD in CD-DRIVE IBook shows blinking question mark with a folder on its
screen.But yesterday I managed to delete hdd's FAT32 partition and replace it with HSF+. (in other laptop and in Windows XP) And when I but that hdd with HSF+ back to my IBOOK one change occured.Now, if it is turned on without OSX CD in it's CD-DRIVE, it shows on screen at first big globe and after a while blinking question mark with a folder.Therefore I assume,that
the problem cannot be in hardware,because if I changed HDD partion type,
then something else also changed?? Anyway OSX install still didn't show any HDD. What I have to do?? Could FSB upgrade be the key to that problem? (I don't want to believe it,because I read,that if overclocked,IBOOK would work fine, or it would crash- nothing related to the hdd.) HELP!!!
Kaarel from Estonia.