jollyton12
Registered
HAY PLZ HELP ME
my apple powerbook g4 ,15 INCH
...is not starting up i only c the blue/GREY screen with the apple logo n the circl thing
I FOUND THIS INFOMATIN HERE I DID THIS N NOW I C CODES ON MY SCREEN HELP ME PLZ
To zap the PRAM, hold down Command-Option-P-R after the startup chime.
However, you might want to do the following. Hold down Command-Option-O-F to go into Open Firmware. Once in there, type "reset-nvram" and hit return. Once returned to the prompt, typr "reset-all", hit Return, and the Mac will reboot. Be sure to leave out the quotes on both commands. Hope this helps.
HELP ME TO REMVE THIS CODES COMES ON MY SCREEN ..AFTER I DID TAH TTHING WHICH TELLA BOVE I AM GETTING TEH CODES,,,BEFORE MY PROBLEM WAS EASY I GUESS I JUST HAD TO INSTALL PANTER OS AGAIN
Unable to find driver for this platform "ACPI", overlaid on the kernel panic screen at startup.
I can't reboot into safe mode. In single user mode and verbose mode, the same error message appears and I can't type anything after it does.
my apple powerbook g4 ,15 INCH
...is not starting up i only c the blue/GREY screen with the apple logo n the circl thing
I FOUND THIS INFOMATIN HERE I DID THIS N NOW I C CODES ON MY SCREEN HELP ME PLZ
To zap the PRAM, hold down Command-Option-P-R after the startup chime.
However, you might want to do the following. Hold down Command-Option-O-F to go into Open Firmware. Once in there, type "reset-nvram" and hit return. Once returned to the prompt, typr "reset-all", hit Return, and the Mac will reboot. Be sure to leave out the quotes on both commands. Hope this helps.
HELP ME TO REMVE THIS CODES COMES ON MY SCREEN ..AFTER I DID TAH TTHING WHICH TELLA BOVE I AM GETTING TEH CODES,,,BEFORE MY PROBLEM WAS EASY I GUESS I JUST HAD TO INSTALL PANTER OS AGAIN
Unable to find driver for this platform "ACPI", overlaid on the kernel panic screen at startup.
I can't reboot into safe mode. In single user mode and verbose mode, the same error message appears and I can't type anything after it does.